1963-1982 Rear Trailing / Control Arms - Offset (ND)
2-inch offset. Increases wheel backspace clearance over stock T-arms. Bolts in similar to factory trailing arms. No chassis modifications needed. Can use OE bearing assembly, strut rods, half shaft, and springs. Does not change the placement of the bearing assembly. Replaceable heim bearing at the
Description
For 15-inch wheels, you typically need a one-inch shortened composite spring for proper tire clearance. For 17-inch wheels, you typically need a half-inch shortened or can use a one-inch shortened spring. Running an offset trailing arm will allow you to run a wider tire on a stock rim or run a wider aftermarket rim with more backspacing. All arms are cast and set up for a spherical bearing for reduced deflection and binding in the control arm pivot to increase handling and ride quality.
Specifications
| Paragon Item No. | 15190 |
| Base Unit of Measure | PR |
| Net Weight | 29 |
| Car Years 1 | 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 |
| Part # | 582183 |
| Search Description | SUSPENSION TRAILING ARMS VAN STEEL |
Reviews (0)
There are no reviews yet.
