97-04 Outside Mirror Glass With Backing Plate - With Heated Outside Mirror - Exc

0 reviews write a review
Remove the glass case from the assembly. Disengage wire terminals on the back side of the glass case. Disengage the two way connector. Disengage the four way connector (for EC and Turn signal only). Replace the glass case and reconnect the wire terminals. Reconnect the two way connector (for EC
Expected to ship in 13 days Low stock In stock
515020
Each
price:
$127.95
price per Each
(tax excluded)
This product cannot be ordered online...
Description
Remove the glass case from the assembly. Disengage wire terminals on the back side of the glass case. Disengage the two way connector. Disengage the four way connector (for EC and Turn signal only). Replace the glass case and reconnect the wire terminals. Reconnect the two way connector (for EC only). Reconnect the two way connector. Reconnect the four way connector (for EC and Turn signal only). Orient the ears on the ball (head) of the actuator shafts in the power pack to be in line with the centerline of the pivot. Center the glass case over the power pack. For non-EC glass, use the palm of your hand and carefully apply pressure at the center of the glass until the glass case snaps into place, for EC glass, put a 2" x 3" block of wood in the center of the glass with a cloth placed between the glass and the block, then apply pressure at the center of the glass until the glass case snaps into place. Fully depress the glass case over each actuator shaft and each memory sensor (if present) to connect.
Specifications
GM Item No. 12530715
Base Unit of Measure EA
Net Weight 0.5
Special Order False
Car Years 1 1997 1998 1999 2000 2001 2002 2003 2004
Part # 515020
Search Description BLINKER WIRING
Reviews (0)
There are no reviews yet.
    Loading
    Loading