Hawk performance HP Plus material can take the heat at the track and get you home safely without having to change you brake pads in and out. This compound was designed for the serious street and autocross enthusiast.
Warning! Due to the dramaticfriction levels produced by this product to achieve race level braking; rotor wear, noise, dust and pad life may be affected
1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2-3 hard stops from approximately 40-45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.