63-67 Wheel Well Repair Kit - Rear Stock Hand Layup
Used to remove flared wheel openings. Approximately 4 wide around wheel well. If more than this is needed, buy a stock rear quarter panel. HL = Hand layup parts are manufactured by hand laminating pattern cut fiberglass mat and fiberglassresin into a precision mold. This method produces high
Description
Used to remove flared wheel openings. Approximately 4 wide around wheel well. If more than this is needed, buy a stock rear quarter panel.
HL = Hand layup parts are manufactured by hand laminating pattern cut fiberglass mat and fiberglassresin into a precision mold. This method produces high strength panels with uniform thickness and a smooth surface only on one side.
PM = Press molded parts are formed under pressure in matched molds as original. This assures a high strength part with a smooth surface on both sides.
WARNING
HL = Hand layup parts are manufactured by hand laminating pattern cut fiberglass mat and fiberglassresin into a precision mold. This method produces high strength panels with uniform thickness and a smooth surface only on one side.
PM = Press molded parts are formed under pressure in matched molds as original. This assures a high strength part with a smooth surface on both sides.
WARNING
Specifications
Base Unit of Measure | PR |
Net Weight | 1.6 |
Car Years 1 | 1963 1964 1965 1966 1967 |
Part # | 142056 |
Search Description | PANEL 1/4 FIBERGLASS |
Reviews (0)
There are no reviews yet.