This antenna consists of a four section mast, a chrome plated mounting nut containing two notches located 180 degrees apart (designed to be tightened with a "spanner" wrench), a chrome spacer, and a black plastic gasket. The mast section of the antenna consists of four round chrome sections, three telescoping sections, and one fixed section, with an approximately 1/4" ball-shaped tip at the end of the mast. The overall height in a lowered position from the bottom of the black plastic body gasketto the top of the ball is approximately 15".
Top of mast pushes down all the way like the original.
Correct metal base. Has bowtie logo as original.
Less cable and ground plate.