The AM/FM can be configured for 1, 2, 3 or 4 speakers with a maximum output of 180 watts RMS (45 watts x 4 channels, 4 ohm speaker impedance, 14.4 volts input). Where the original radio did not provide for balance or fader controls, they can be programmed using the tone control. Note on Rebuild Services: It is common for extra parts to complete a rebuild that are not included in the listed rebuild charges. The prices on these vary. If less than $35, you will be billed for the extra parts and the rebuild service will be completed. If more than $35, we will contact you for approval before the rebuild service is performed. Note: if you refuse the extra cost, you will still be charged $25 for the time.
SENDING INSTRUCTIONS: Ship part via UPS if possible & insure package in case of damage enroute. Write FOR REBUILD on outside of box. Inside, include a sheet with your name, address, email and phone # so we may call you for billing info. Put at least 3" of packing material all around part.