1997-2004 Wing / Spoiler Rear Contoured Coupe Unpainted
Measurements: 56 inches tip to tip. 3.75 inches high in the center. Continue the contours of your Corvette's rear fascia with this custom-designed rear wing. Smart styling lends a new look to any C5 coupe. Fiberglass material is ready to sand, prime, paint, and bolt onto the rear bumper at the
Description
Measurements:
56 inches tip to tip.
3.75 inches high in the center.
Continue the contours of your Corvette's rear fascia with this custom-designed rear wing. Smart styling lends a new look to any C5 coupe. Fiberglass material is ready to sand, prime, paint, and bolt onto the rear bumper at the three pedestal locations with three studs. Drilling required.
There is a $10.00 packaging charge.
Continue the contours of your Corvette's rear fascia with this custom-designed rear wing. Smart styling lends a new look to any C5 coupe. Fiberglass material is ready to sand, prime, paint, and bolt onto the rear bumper at the three pedestal locations with three studs. Drilling required.
There is a $10.00 packaging charge.
Specifications
| Base Unit of Measure | EA |
| Net Weight | 7.5 |
| Car Years 1 | 1997 1998 1999 2000 2001 2002 2003 2004 |
| Part # | 145002 |
| Search Description | SPOILERS WINGS FIBERGLASS |
Reviews (1)
-
Rear Spoiler
Not very obtrusive rear wing which adds a little extra to the rear end of your C5 coupe. Excellent quality fiberglass and construction. Shipped very securely. There is a fair amount of fiberglass prep necessary before painting so if you are taking the wing to a shop to be painted, be prepared to pay for the time for them to get it sorted. Requires 5 - 1/4 holes drilled into rear fascia. Would recommend removing center stud from wing and using 20mm long 6mm bolt to attach wing to fascia due to location of 3rd brake light. The 4 other studs (2 per side) are easily accessed by removing taillights and reaching into taillight opening. Very happy with the finished result.