1956-1996 283/327/350 Magnum Pushrods with Hydraulic Roller Cam (ND)
7.2 inches long x 5/16-inch 0.312-inch diameter Set of 16 For small block engines with a roller camshaft. These will NOT work in a big block engine. Camp Cams Magnum Pushrods perfectly complement your Hot Street, Bracket, Oval Track, or any other high-performance engine. Magnum Pushrods are
Description
For small block engines with a roller camshaft. These will NOT work in a big block engine. Camp Cams Magnum Pushrods perfectly complement your Hot Street, Bracket, Oval Track, or any other high-performance engine. Magnum Pushrods are one-piece .080" wall chrome-moly steel. These pushrods are an affordable alternative for engines needing a pushrod to start up to higher spring pressures and the associated stresses of a high-performance engine. All Magnum Pushrods are Heat Treated to be compatible with guide plates.
If your small block engine has the factory flat tappet or hydraulic lifter camshaft, you need push rods that measure 7 3/4 inches long, our parts #301037. Four sets are required.
Specifications
| Base Unit of Measure | SET |
| Net Weight | 2.06 |
| Car Years 1 | 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 |
| Part # | 301174 |
| Search Description | ENGINE ROCKERS RODS |
Reviews (0)
There are no reviews yet.