The Lingenfelter 720HP Stage 1 Z06 Corvette Upgrade Kit is based on LPE's installed Stage 1 package for the C7 Z06 Corvette, bringing the same proven combination of components installed at Lingenfelter to performance shops and experienced DIY consumers.
The Lingenfelter Stage 1 Kit produces 720 HP and 730 LB-FT of torque at the flywheel.
The LPE Stage 1 Z06 kit includes virtually all of the required parts other than the engine calibration.
* Lingenfelter/ATILT1/LT4 Dry Sump Torsional Vibration Damper
* Lingenfelter 9.2" 15% Overdrive Supercharger Drive Damper Pulley
* Pulley Fasteners
* Supercharger Belt
* 100mm Idler Kit
* Low Restriction Air Filter
* Crankshaft Bolt
* Diagnostic Port (DLC) Cover Kit
* Installation Instructions
Engine Dyno Testing Results:
* 720 HP at 6100 RPM
* 730 LBS-FT at 750 RPM
* 13 psi boost increase of roughly 2.5 psi
* Lingenfelter designed, developed, and tested package of components