Hawk performance HPS material provides advanced braking characteristics to enhance your driving experience. This unique Ferro-Carbon compound Viscoelastic the safety and quality of aerospace design partnered with the braking technology of motorsports. HPS is one of the first materials to pass the new FMVSS 135 government safety test. Performance, safety, and quality are the trademarks of this material.
*Extremely low dust
*High friction/torque hot or cold
*Gentle on rotors
*Much improved braking over OE
*Long pad life
1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2-3 hard stops from approximately 40-45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.WARNING