This kit is sure to be a hit with C6 Corvette owners. GM used a total of twelve of these style Torx Screws under the hood. We put fourteen in each kit so you have a few extra chrome torx screws. These are the Torx head screws that secure the inner fender to each side. Easy to install, be sure the engine is turned off and cooled down. Open the hood and replace the factory torx screws located on each inner lip where the outer fender meets the inner fender by the weatherstrip area.
Be careful when installing the new screws to be sure they thread in properly. DO NOT OVER-TIGHTEN SCREW!
It is best to only remove 1-2 screws at a time and replace them with the new screws and washers before moving on the the next screws.